Lathe Training
Learn every lathe process in this online course
Do you feel like there might be a better way to use your lathe?
Do you struggle to machine within tolerance?
Do you feel unsure/unsafe when working on your lathe?
Want your parts to look better?
The lathe has always been the backbone of the machine shop.
This Manual Lathe Online Course offers a unique learning experience that combines the convenience of online education with the hands-on training of a mini apprenticeship. Designed for hobbyists and professionals alike, this course will empower you to master the art of metal turning on a lathe and unlock your potential for precision engineering.
Upon Completion, you will have all the skills and knowledge to make anything on a lathe.
I have built this course based on the skills and techniques I learnt as a manual lathe apprentice back in 1991.
You will learn everything I was taught as an aerospace apprentice and much more in this online mini-apprenticeship.
Over 4 years of machine training condensed into one online course.
This Lathe training course covers everything you need to be able to operate your Lathe with precision and confidence.
In this lesson, we look at the slideways of a metal work Lathe and how we can get accurate results on any machine.
This free lesson is a short glimpse of what you can expect from this course.
The full course covers every operation on a Lathe to make any part imaginable.
- Introduction
- Introduction
- Parts of a centre lathe
- Familiarisation of machine controls and safety devices
- Lathe Safety
- The Tool Post
- Slides
- Dial Test Indicator
- Turning Tools
- Basic Turning Operations
- Facing
- Rough Turning
- Finish Turning
- Chamfering
- Grooving
- Centre Drill
- Drilling
- Tapping
- Accurately Achieving Lengths and Diameters
- Parting Off
- Second Op
- Practical: Part 1
- Intermediate Turning Operations
- Order of Operations
- Changing the Chuck Jaws
- Mounting Chuck / Reverse Jaws
- Working with Backlash
- Die
- Reaming
- Boring
- Taper Turning with Compound Slide
- Sine Bar and Slips
- Face Grooving
- Coolant
- Knurling
- Practical: Part 2
- Screw Cutting
- Screw Cutting Part 1
- Screw Cutting Part 2
- Screw Cutting Part 3
- Screw Cutting Part 4
- Screw Thread Theory
- Practical: Part 3
- Advanced Turning Operations
- Work Holding
- Using the Tailstock
- Fixed Steady
- False Centres
- Travelling Steadies
- Between Centres Part 1
- Changing to a 4 jaw chuck
- Clocking in the 4 jaw chuck
- Between Centres Part 2
- Eccentric Turning
- Filing Radii
- Polishing
- Turning Radii
- Practical Part 4
- Speeds and Feeds
- Final Words
If your question is not answered in this FAQ section, feel free to message me on my contact page.
They take care of your transaction with their secure payment processors that support several different payment methods.