G-Code Lathe Project - The Bush Part 6
Part Six - Parting off
This final video in this series of free G-Code lessons you will learn how to program a CNC lathe to make a bush. This series is a sample of what you will learn in the CNC Lathe programming course available here
To complete our component we need to write a parting off sequence. In this video, I write the g-code step by step explaining everything as I go.
Important note
“My courses teach a generic version of FANUC G-Code that may be slightly different than the version used by your machine. By learning the generic g-code that is taught by trade schools (and me) it is easy to adapt to custom versions of the language by reviewing pre-written programs or by consulting the operators manual. There are many variables at play between machines, even two of the same machines may not safely run the same program depending on many factors. Because of this, you should never expect to be able to copy a program into a machine and expect it to work without issues. Even my programs. The example code in my videos is for training purposes only and not intended to be run in a machine.”- Marc
Share this article
Machine Shop Maths Course
For a complete tutorial on CNC Lathe Programming check out my course.
The quickest way to learn CNC Programming